Naue Steel P system for reinforced slopes and reinforced walls

The Naue Steel P system combines Secugrid® geogrid reinforcement with longterm (permanent) steel-skin facings to create reinforced soil structures amenable to numerous slope shapes. Vegetation is allowed on slopes up to 70°. For steeper slopes on which vegetation is desired, special plantings and irrigation are necessary.

For Naue Steel P, the Secugrid® primary reinforcement is fastened to the steel shells (e.g., L-shaped wire forms) to create a strong interface. To prevent soil erosion along the galvanised steel facing, Secutex® nonwoven filter geotextiles or Secumat® erosion control mats are used. The Naue Steel P system for reinforced slopes and reinforced walls is highly adaptable to project-specific requirements and geometries, resulting in economical solutions supporting natural vegetation.

Solutions with Secugrid® m3 Steel P

  • Landslide, slope and embankment restorations

  • Slope stabilisations up to 70°

  • Vegetated slopes with gradients between 45° and 70°

  • Retaining wall structures up to 90°

  • Road and rail noise barriers

  • Protection against rockfalls

Selected advantages of Secugrid® m3 Steel P

  • Permanent stability even up to 90°

  • Green solution

  • High load capacity

  • Variable spacers allow site-specific slope face adjustment

  • Quick and easy construction

  • Site soils (including cohesive soils) can be used

  • Extremely economical, due to the ability to utilise more-affordable cohesive soils rather than dispose of or replace them with non-cohesive soils

  • Secugrid® geogrids can be used with cement stabilised and lime stabilised soils

  • Ecological benefits associated with the use of local soils include decreased transportation pollution (and cost) and conservation of natural resources

System components

  • Secugrid® geogrid reinforcement

  • Secumat® erosion control mat and/or nonwoven Secutex® geotextile

  • Fasteners

  • Hydroseeding

  • Galvanised steel facings

Secugrid® m3 Steel P installation

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Additional Secugrid® m3 systems

Secugrid® m3 Clamp

Solution:
Reinforced steep slopes up to 50°

Secugrid® m3 Wrap

Solution:
Reinforced steep slopes up to 70°
Reinforced retainig walls up to 90°

Secugrid® m3 Steel T

Solution:
Reinforced steep slopes up to 70°
Reinforced retainig walls up to 90°

Secugrid® m3 Gabion

Solution:
Reinforced steep slopes up to 70°
Reinforced retainig walls up to 90°

Secugrid® m3 Block

Solution:
Reinforced steep slopes up to 70°
Reinforced retainig walls up to 90°

Secugrid® m3 Panel

Solution:
Reinforced steep slopes
Reinforced retainig walls up to 90°

Secugrid® m3 Nail

Solution:
Reinforced steep slopes up to 60°

Secugrid® m3 DW

Solution:
Reinforced retainig walls up to 90°

Loading...