
Expanding landfill capacity with a multilayer sealing system
During the expansion of a regional landfill in Szeged, Hungary, Naue supplied Bentofix®, Carbofol® and Secutex® for a multilayer base sealing system. Construction took place alongside ongoing landfill operations.

Project background
The Szeged regional landfill is located north of Szeged in southern Hungary, near the M43 motorway. Phase I of the Szeged regional landfill, which was constructed in 2007, had an insufficient capacity and required a second Phase.

Building a new landfill cell while existing operations continue
The landfill remained operational during construction, which complicated site logistics. According to the project report, limiting construction traffic was one reason for selecting geosynthetics. The specified build-up retained a 50 cm compacted clay liner and a 30 cm gravel drainage layer.
The project included the construction of the landfill sealing system, a leachate drainage system, a stormwater drainage system, and an access road.
Soil mechanics tests on the subsoil revealed clayey soil layers with adequate bearing capacity and hydraulic conductivity values ranging from = 10-10 m/s and k = 6 x 10-9 m/s.
A multilayer base sealing system combining Bentofix®, Carbofol® and Secutex®
The construction of the first segment of Phase II was based on the model of Phase I, using earth dams and field levelling, built alongside Phase I in such a way that the two phases could be combined to form a single depot.
After topsoil removal, the extension area was backfilled with compacted soil of suitable bearing capacity by up to 1 m, to a level of 79.50 mBf. This backfill raised the formation above the maximum groundwater level.
The structure of the landfill base sealing system was as follows (from top to bottom):
- 200 g/m² needle-punched filter nonwoven, specified for later installation by the operator during the filling phase
- 30 cm gravel drainage layer (16/32 mm)
- 1,200 g/m² PP protection nonwoven, Secutex® R 1201
- 2.5 mm HDPE geomembrane, Carbofol® 406 s/s
- geosynthetic clay liner (GCL), Bentofix® NSP 4900
- geoelectric monitoring system
- two 25 cm layers of compacted clay liner (CCL) with k ≤ 1 x 10-9 m/s
- soil backfill
- subsoil
The compacted clay liner was constructed to a total thickness of 50 cm on the base of the landfill, in compaction layers of up to 25 cm. Accredited tests confirmed a hydraulic conductivity of k < 10⁻⁹ m/s.
A geophysical monitoring system was installed on the surface of the CCL, with sensor electrodes arranged in a 5 m × 5 m grid. The system was designed to help locate potential defects in the HDPE geomembrane for investigation and repair.
The Bentofix® NSP 4900 geosynthetic clay liner was installed above the compacted clay liner and its geophysical monitoring system to provide an additional sealing layer. This was followed by the 2.5 mm Carbofol® HDPE geomembrane. The Secutex® R 1201 PP protective nonwoven (1,200 g/m²) was placed over the geomembrane to help protect it against indentation and mechanical damage from the drainage gravel during installation and operation.
The construction company installed a 30 cm layer of 16/32 mm drainage gravel on the Secutex® R 1201 protection layer. A PE drainage pipe network collects leachate and conveys it to an HDPE-lined basin for subsequent treatment at a wastewater treatment facility near the landfill.
The design also specified a separate 200 g/m² filter geotextile between the drainage gravel and the waste, to be installed by the operator during the filling phase. The main contractor selected Naue to supply the geosynthetic products for the landfill sealing system.
Project benefits
Limited construction traffic
The Naue geosynthetic layers were selected in part to limit material transport on the active landfill site while the new cell was constructed.
Sealing and protection from one supplier
Naue supplied the geosynthetic clay liner, HDPE geomembrane and protective nonwoven, giving the contractor one source for the key geosynthetic components of the specified lining system.
Project information
- Project name
Landfill Szeged, Phase II, Segment 1, Szeged, Hungary
- Designer / consultant
GEON system Kft., Miskolc, Hungary
- Products
Bentofix® NSP 4900
Carbofol® 406 s/s HDPE, 2.5 mm
Secutex® R 1201
No. 00809



