Skip to content
Large construction site with excavators, trenches, and stacked pipes beside multistory brick buildings in an urban harbor area.

Geogrid-reinforced load transfer platform in HafenCity Hamburg

At Hongkongstraße in Hamburg’s HafenCity district, soft clay and peat layers required a foundation solution to limit settlement of the raised road. A load transfer platform reinforced with Naue Secugrid® 400/40 R6 and 200/40 R6 geogrids was constructed above supporting columns.

Construction site with excavators and reinforced ground.
Construction site with excavators and reinforced ground.
Construction of the load transfer platform with Secugrid® at Hongkongstraße, HafenCity Hamburg
Construction of the load transfer platform with Secugrid® at Hongkongstraße, HafenCity Hamburg

Where others sink, Hamburg remains stable

Hamburg's HafenCity is one of the largest inner-city development projects in Europe. Covering an area of approximately 157 hectares, this pioneering urban district will offer new residential and commercial spaces. To ensure that main transport routes are safe against flooding - including Hongkongstraße - parts of the former harbour area are being raised by over 3 metres.

The key challenge: the subsoil consists of soft clay and peat layers that are highly prone to subsidence. Using conventional construction methods, long-term settlements of up to 40cm would be expected - posing serious risks to the road, utility lines, and nearby historical quay warehouses, which are piled.

Naue Secugrid® installed crosswise.
Naue Secugrid® installed crosswise.
Crosswise installation of Secugrid® geogrids in the load transfer platform
Crosswise installation of Secugrid® geogrids in the load transfer platform

Reliable strength when the ground weakens

An innovative foundation concept was implemented to meet the demands of bearing capacity, settlement control, and cost-efficiency: a load transfer platform (LTP) reinforced with high-performance Secugrid® geogrids from Naue.

The core of the solution: Secugrid® by Naue

  • The Naue Secugrid® 400/40 R6 and 200/40 R6 geogrids were selected to meet the project’s tensile-strength and stiffness requirements for reliable load transfer and load distribution within the platform
  • Crosswise installation with side wrapping - enabling precise installation even in confined construction environments
  • The geogrid layers were installed with the overlaps and junctions specified in the project design

System structure

  • Rigid inclusions by lime-treated ground improvement (Ø 0.6 m) at 2.3m x 2.5m spacing
  • Geogrid-reinforced sand cushions in 15cm layers above the pile heads
  • Load-bearing structure with arching effect between the geogrid and subsoil
  • Instrumentation and monitoring to verify structural performance

Functional, stable, future-ready - tested in a metropolitan setting

Even with the construction of a deep excavation pit adjacent to the LTP, all deformations remained within acceptable limits. The residual settlements remain below the permissible limit values of a maximum of 5cm even under permanent pore water pressure alteration following the large tidal range of the nearby River Elbe - proof of the robust, conservative design. The stress distribution clearly shows the formation of a load-bearing arch that efficiently transfers loads to the columns and reduces pressure on the subsoil.

Why Naue Secugrid® geogrids were selected for this project?

Naue’s Secugrid® was deliberately selected - a geogrid combining high efficiency design strength with exceptional long-term stiffness, ideal for demanding foundation systems. In the space-constrained setting of HafenCity, Secugrid® proved its value with reliable performance, robustness, durability, ease of installation, and consistent function.

Project outcome: load transfer and settlement control

With Naue Secugrid®, an innovative solution with scientific support was realised in Hongkongstraße that not only meets today's requirements. The system was designed for the project’s specified loading conditions and settlement requirements.

Project benefits

  • Base course stabilisation

    Effective load transfer

    Secugrid® reinforces the load transfer platform, helping distribute loads towards the supporting columns.

  • Reinforced foundation

    High tensile stiffness

    Secugrid® provides tensile reinforcement to support load distribution within the platform.

  • Base course stabilisation

    Settlement control

    The geogrid-reinforced system helps limit differential settlement on soft clay and peat.

  • Easy installation

    Adaptable installation

    Crosswise installation and side wrapping allow the reinforcement layout to accommodate confined urban construction conditions.

Project information

  • Project name
    HafenCity Hamburg, Hongkongstraße, Germany
  • Client
    HafenCity Hamburg GmbH, Germany
  • Construction company
    Eggers Umwelttechnik GmbH, Hamburg, Germany
  • Planning
    Grundbauingenieure Steinfeld und Partner GbR, Hamburg, Germany
  • Monitoring
    BBG Bauberatung Geokunststoffe GmbH & Co. KG, Espelkamp, Germany
  • Products
    Secugrid® 400/40 R6
    Secugrid® 200/40 R6

No. 01100